Locker Bed & Corner Unit Set

DIMENSIONS:
Overall Locker Corner Unit Set: 119"w x 119"l x 48"h
* Set requires 20 feet of wall space, 10 ft on each wall.
Overall Corner Unit and Hutch: 41”square x 48”h
* Overall Hutch: 33”square x 8.5”h
* Small Cubbies (2): 15.5”w x 15.5”deep x 7”h
* Large Cubby (1): 15.5”w x 31.5”deep x 7”h
Overall Corner Unit: 41”square x 39”h
* Cubbies (4): 19.5”square x 6.5”h
* Open interior space underneath cubbies: 39.5”square x 29.5”h
* Corner Unit and Hutch extends from corner: 58”
* Twin bed: 41”w x 78" long; 10" sides
* Twin clearance to floor: 9"

COMPOSITION & CONSTRUCTION:
* Overall: Iron Steel and MDF with Maple veneer
* Metal finish: brushed powder coating
* Locker Corner Unit has 4 cubbies of equal size.
* Locker Corner Hutch has 3 cubbies total: one large and two small cubbies.
* Locker Corner Hutch has 4 locker doors with 5 air vents per door and a locker handle.
* Locker Corner Hutch has felt strips along its bottom edges, as to not damage the Corner Unit’s top surface.
* Brushed iron bed frame holds (2) locker drawers for underbed storage.
* Drawers face one side only (bed holds total of 2 drawers).

CARE:
* Use a slightly damp cloth to clean.
* Abrasive cleaner is not recommended for use.

DIMENSIONS
Twin
Overall: 41" wide x 78" long; 10" high sides
Clearance to floor: 9"
13 slats for supporting mattress without box spring
Twin fits a standard 39 x 75" mattress

Full
Overall: 56" wide x 78" long; 10" high sides
Clearance to floor: 9"
13 slats for supporting mattress without box spring
Full fits a standard 54 x 75" mattress

Queen
Overall: 63" wide x 83" long; 10" high sides
Clearance to floor: 9"
14 slats for supporting mattress without box spring
Queen fits a standard 60 x 80" mattress

Drawer: 22" wide x 17.5" deep x 7" high

COMPOSITION & CONSTRUCTION
Frame: Frame and slats are made of brushed iron with a lacquer sealant. Frame holds locker drawers for under-bed storage. Low profile (close to the ground) with a sporty unisex design. Designed for use with a mattress only (no box spring required). Rests on four rolling casters; two casters have locks to keep frame in place. Attachable corner cages are included to prevent mattress from slipping.

Drawers: Drawers face one side only (bed holds total of two drawers). Drawers are interchangeable (one size) and fit within all PBteen locker pieces. Drawers ship separately from frame and may arrive prior to bed delivery.

DIMENSIONS
Overall: 22" wide x 17.5" deep x 7" high
Handle: 4.5" wide x 1.5" deep x .5" high
Nameplate: 3" wide x 1.5" high
(10) Airflow vents: 5.5" long each

COMPOSITION & CONSTRUCTION
Drawers: Drawer is made of iron sheet metal with a high-quality powder-coated finish. Finished on all sides and interior. Sturdy iron frame is soldered together at joints. Details include a nameplate and 10 airflow vents on drawer front. Drawers are interchangeable (one size) and fit within all PBteen locker pieces. Drawers ship separately from frame and may arrive prior to frame delivery.